What I practice

The simple maintenance I  practice over the years

1. Aircond to be service every 4 years that include removing all component of the aircond compressor, clean and replace any o-ring or gasket. Oil change and refill with new gas. Dryer must be replace.
2. Yearly practice to replace
    A. Air- cond cabin filter
    B. Radiator Coolant
    C. Aircond belt, power steering belt, alternator belt or every 25000km

3. Tyre change every 4 years or bald condition within the 4 years duration.
4. Engine oil change every 10,000km ( fully syn.oil) or 5000km( semi syn)
5. Gear oil for manual transmission and ATF oil replace every 20,000km.
6. Brake oil and power steering oil replace every 20,000km
7. Spark plug replace every 10,000km ( normal) and if using good ones at every 
    80,000km.
8. Clutch plate replace at 160,000km
9. Timing belt best to replace at 80,000km even thou fitted with 100,000km
    lifespand.
10. Water pump replace on the 2nd schedule of the timing belt replacement.

Hyundai Matrix inner door handle replacement

In my 2014 posting I had the driver and rear right passenger inner door replace: http://ritzzuan.blogspot.my/2014/06/replacing-hyundai-matrix-inner-door.html until today both are working good.

And yesterday I had the left side passenger inner door handle replace. I use the spares I have, the OEM from Taiwan. Surprise that it can't fit in well. The screw not align with the hole. I have trouble mounting it and end up a broken bracket.

So I bought the original handle instead. The top piece is from Taiwan and bottom is the original from Korea ( RM45/pc )

The inner looks, the Taiwan looks flimsy but hey...what you pay is what you get!

The final installation, looks great !

My small Diecast

It all started after I bought a few Hot Wheels,then follow by Ferrari diecast. Not really serious at this moment but find this tiny toys has it's own character. So I have place them on my coffee table, that would be my project table to design a landscape to this toys. I have include some Lego's too.

 I DIY the Hot Wheels clear plastic cover   and place each them on a wooden board. Have each of them stick with double sided tape. Hope you like the video li