The current layout as below. Better to have the small tail lamp replace.
In order to removed the small tail lamp which is bolted on the rear bonnet, you have to removed the 4 nuts with box spanner size 8mm.
Then with a slight push from the rear, the small tail lamp can be pull out easily.
Once removed..a hollow section as seen below.
The diferrences between the old and new small tail lamp...
Installation of the new tail lamp have to be very carefull no doubt its plug n play. There are still minor push and press before you finally screw in the 4 bolts. There will be also additional wiring, the green white cable connect to the number plate and the green cable is connected to teh brake light. I have secure the joint with a cable tie.
The final look
I thank you to Sugaring in helping me and David for his advice. The DIY was a success.
4 comments:
no worries bro .. enjoy the poison !
i looks better on black colour car ..
Yeah...Im enjoying it...poison poison!!
Hi! I'm an X20 owner as well :) I'm interested in knowing where you bought these brake lights :)
Hello Abdul Rahim..I bought it in Singapore and its going to be 3 year plus since I own them. There is a shop in JB selling them: http://www.speedoauto.com/shop/category.php?id_category=143. Give them a ring!
Post a Comment